HOME
inventory engines to instrumentation
inventory port holes to winches

Air compressors, air compressor
    2 cylinder,  Worthington, Air end,  single stage, 96cfm   90 psi max.  $350 (ics)

    Ingersol Rand, 250 cfm @ 125 PSI to 175 PSI,  Three cylinder two stage,  75 horse power, Electric 240 / 480V  belt     driven, skid mounted.  Qualified Motor,        reconditioned air end.  $4,500   (iw)   pic

    Atlas Copco, 295 cfm, Vee 4 two stage, 75 hp, electric 240 / 480V, belt drive, skid mounted,  reconditioned $6,500       (iw)   pic

    Three cylinder two stage air end only no power. Rail road compressor  Ingersol Rand,   75 HP   $3000  (ics)

    Worthington,  Air compressor, 3500 PSI, 15 HP  13.5 CFM  4 stage, reconditioned    $5000      (ics)

    Smith portable, engine driven, electric start,  "typical of mobile tire repair trucks" 45 cfm  good condition   $2,000   (ics)

    Start air compressor 250 psi capacity,  w/ 1 cylinder spark engine clutched and electric motor $2,400  (ics)

    Start air compressor Worthington 1943 for Cleveland diesel engine 2 cylinder water cooled 600 PSI electric drive 7.5 HP, 114 CFM free air,  good condition,    $4,000       (iwcs)

    Devilibiss 10HP Electric 3 phase, 60 gallon tank, (iwdk) $000

    Natural Gas Compressor, 3,600 PSI. single electric motor 40 HP, 3 phase, 60hz, twin compressor heads, skidded with standard controls. $36,000

Anchors, anchor:
  10# navy style $40
  20# $40
   40# navy style $100

  galvanized steel, $300 pic

Kedge style
  30# $100
  130#  $200  qty. 3 pic
  140#  Rod Iron, this is very old, authentic $650
  750#  New qty 1   $1,000ea.   (owo) pic

  Kedge,  Decor  approx. 2500 Lbs.   $3,500   (op)

Antiques,  decor, marine and industrial:
    Hemp dock fenders "bumpers"  24" round 36" long   authentic.   Qty 6  $400ea.(iu)

    Bird dogs,   cable to log connecting hardware part,  unique to North West log rafting and timber harvest.  $5ea.    (ows)

   Brass ship lanterns  Polished brass and copper approximately 20" tall   (is)
     Anchor brand, 1 copper, 1 brass, $300
     Authentic, brass, 4 ea. dome top  $350
     Authentic, brass, 9 ea. flat top  $350

    Authentic corridor type electric light, surface wall mount with protective grid polished 5 ea. $150
    Authentic corridor type electric light, surface celing mount with protective grid   $100

   Gimbal lanterns polished brass $150   (is)

   Deep sea diver helmets   replicas $1,100 (iu)

   Small Brass bells 4 1/2" diameter  w/anchor mount     $15   (is)

   S.S. Himalya Brass bell 6 1/2" diameter $45

   Cargo hatches,  wood planks bound w/steel strap,  authentic,  good for benches, tables etc.  $50 to $100ea.  (of)

   See also: chain, anchors, Portholes, Propellers,   pic
 

Boats, boat:

    28' X 9' beam 59 person life boat.   Riveted Metal skin, benches and water tanks inside Qty 1  $2000  (ofdk) pic

Boilers, boiler:
    Vertical tubeless Package Boiler,   Size 30  Model 170,  150 PSI,  10 GPH Oil,  Williams & Davis,  Sept. 1974       Good Condition almost new, W/ expansion         tank   ASME # 543,   Heating surface   96, like new  $3,500 (opdk)

   ____________________________________

    480,000 BTU   Gas or Oil, Max. WP  15 PSI, Ajax Boiler & Heating Co.  Model SFOX-600  S/N 72-26323,   BTU     input  600,000,  Qty. 2 $2,500 (ofdk)
____________________________________

Buoys, buoy: Steel pic1 pic2 pic3

   Round 37" diameter $125

    Can buoys, 6' large end diameter, 5' small end,  8'10" tall,  3/8" steel const.,  foam filled,  Pear shape,   Qty 4        $3,000ea.  (ofdk)   pic1 pic2

    Can buoys,  5' large end diameter,  42" small end,  82" tall,   X are riveted (great decor)  Qty. 10    $2,000  (ofdk)  pic1     pic2

    Marker buoys,  11' long,  23" diameter Qty.  2     $1,500    (ofdk)  pic

    Marker buoy,  9' long,  23" diameter $1,500     (ofdk)  pic

    Old riveted construction. Pear shape13 ft. long . 4 each 7ft. diameter, Big end. 1 each 9ft. long 5' diameter, Big end $800     each

Bumpers, bumper: and fendering
 

    various fendering materials:  14"X14"X25' square,  6"X10"X10' square, 10"X12"X6' square, A shape 20"X24"x4'  D     shaped12" X 20' long  and many other short pieces. $2/lb.   big stuff runs about 40#/foot (of)   pic

    Dock fenders,  4' long $2/lb.   (ofba)

Top

Chain:Various lengths of chain and various sizes and types.  Mostly between 1/2" and 1"

    1/2" black chain,  Approx. 500-1000 feet, slightly rusty   $3.50 / foot   (of)

    Approximately 15 bundles  (80' approx.) shots of used  3/4" galvanized   $5.00 / foot   (of)

    Approx.  28 bundles (80' approx.) lower quality galvanized  3/4"   $4.75 / foot   (of)

    Assorted lengths of used 1/2" long link chain   $3.00 / foot    (of)

    1 shot 14 balt chain $350 (of)

    1 shot 2 3/4 Naco $800 (ofdk)

    Short pieces of 1 1/2" - 2 3/4" at $.15 a lb (ofdk)  

Doors, Hatches... water tight  also have separate door frames, parts and levers
    1 ea. 23" X 15" oval hatches 4-dog, 5 in. combing 3/8 thick $000 (ofdk)   
    2 ea. Steel Hatches 30" X 48" X 16" Combing 8-dog 3/8" stock  $350
    1 ea. Steel Hatch 24" X 24" X 8" Combing 4-dog spring loaded 1/2" stock   $400  (of)
    1 ea. Steel Hatch 22" X 28" X 7" Combing Hand wheel spring loaded 1/2" stock    $400  (of)
    1 ea. Steel Hatch 30" X 30" X 6" Combing 4-dog 1/2" stock    $450  (of)
    1 ea. Steel Hatch 28" X 28" X 7" Combing 4-dog 3/8" stock    $350  (of)
    2 ea. Steel Hatches 14" X 24" X 3" Combing Bolted lid 3/8" stock   $200 (of)
   
    2 ea. 26" X 57" Steel 4 dog RH and LH used $500 each (ofdk)
    4 ea. 15" X 23" 3/8" steel oval hatches 4 dog, 5" combing $250 each    (ofdk)
    2 ea. 30" X 48" heavy duty steel hatches, new, 8 dog, $1000 (of)
    1 ea. 30" square, 4 dog, $400 Electrical:
    Oil fuse Cutouts, G&W Electric , Model FC - 61, 15 kV,  100 Amp  NEW,  Qty 3  $250ea.    (iw)     10 HP 115 VDC, Reversing steering controller, Square D   NEW $400    (ics)    25 HP 230 VDC controller, reversing for cargo winch,  shunt field series field, Cutler Hammer,  NEW  $2000 (ics)     40 HP 440V 3-phase 30 Amp, Reversing Controllers , Cutler Hammer     ,mine sweep takeoff,  Qty 4. $1500ea.        (op)     40 HP 115 VDC motor controller, 25 kW 440V 40A generator control, MG controller, Ward Leonard ele.  Qty. 2     $2,000ea.  (op)     65-130 HP 440V 3-phase. 60 HZ, motor controller, Class 6865  Spec. 17C10, SN 7Y1341,  Westinghouse $2000      (op)     Rotary Phase Converter H.A.S manufacturing 230V single phase input
    230V 3 phase output, HP 7.5, used good and clean condition $1000 (iwcharliem)
Power Distribution service cabinet weather proof.
1-400 Amp 480V 3 pole, 3 wire, Inlet connector
1-200 Amp 480V 3 pole, 3 wire Connector outlet
3-60 Amp 480V 3 pole, 3 wire, connector outlet
all with manual disconnects and breakers
Lighting / Lights / Light :
Street light poles, 29 feet long, aluminum    $250  (ofdk)
Street Light poles, 30-35 feet long, steel $150 (ofdk)
Spot Lights for outside yard lighting $150 Marine lights for ship passages brass $50-150 surplus fixtures 10-30
  Transformers, transformer:
    Acme transformer, 150 KVA, HZ 60, 3 Phase, weight 1203lbs, style G, Cat No. T-2A-3500150-35, 480V W/FC -     480y/277 $000 (opdk) pic     Step down transformer, 30 KVA,  3 ph, 230/460V - 275/159,  Ajax   NEW  $500   (ics)    Lighting transformer, 37.5 KVA,  460 - 117,  single phase,  Alice Charmers,   Qty 3  $600ea.   (is)     Step down transformer,  25 KVA 1 ph., 240/480-120/240, International Transformer Company,  Qty. 2  NEW     $400ea.  (icsdk)     Lighting transformer,  15 KVA   1 ph. ,  480 - 120/240,  ITE electrical , $300   (ics)     Air cooled transformer, KVA 45, 3 phase, 480V - 208y/120, cycles 60, weight 990lbs, Cat. No.     AC345_8T18H65.WP, not yet electrically tested, Tierney $000 (opdk) picElectric Motors  AC
    have a few "15 or so" fractional single phase, $20 ,
    3 ph. 1/2 to 5 HP  $20 per HP  $15-100
    3 ph. 7 to 15 HP  $18 per HP  $80-350
    3 ph.  30 HP and up, $15 per HP
    prices are for standard motors,  specials have different pricing
________________________________

H-A-S Rotary Phase Converter 230volt input, single phase, 230volt output 3 phase, No load amps 9.5, Max HP largest motor 7.5, max HP total system 20, serial # 88074, mod R7 5/20-230HD, Design F, 1988 Steelman Industries $1000 (cmiw)

2 HP 220V 1 ph.  3450 RPM, Frame L56C Wagner  $125   (is37, 22B)
2 HP 115/220V 1 ph.  3450 RPM, Frame 56C Dayton  $125   (is38, 22C)
2 HP 230V 1ph. 1715 RPM G.E.    $150 (is03, 22D)
   7.5 HP Single phase TEFC 230 V 28.5 amp, 1770 RPM, 215T frame, GE Mortos, model 5KC215BB211A $350 167#s (is03, 23D) ______________________________
3 phase below here,   many more fractional and up to 5 HP not listed
    2 HP 440V  3400 RPM, frame  224, GE , Sharples purifier motor $600 (is26, 13D)
    2 HP 220/440V  3450 RPM, frame ASP 224,  Crocker Wheeler;  $75  (is27, 14D)
    2 HP 220/440V  3450 RPM, frame  224,  Linestart;  $75     (is28, 14D)
    2 1/2 HP, 220/440V, 1800 RPM, Type BLS 4550, Synchronous , Electric Specialty,;  $75     (is36)
    3 HP 220/440V,  3450 RPM, Vertical shaft , frame NS224BV, Fairbanks Morse $100     (is34, 21D)
    3 HP 220/440V, 1670 RPM, frame 184, GE w/ Stearns electric brake , Model HT 72-9,  Qty. 2 $200 (is34A,B 24D)
    3 HP 208 3 ph.  690 RPM  frame 324,   Allis Chambers $300       (is51A, 60A)
    5 HP 208 3 ph. 860 RPM, frame 324,  Allis Chambers $400  (is51B, 60A)
    5 HP 1200 RPM 440V type KT180, old style motor G.E. (is34, 18D)
    5 HP 220/440V 750 RPM Frame  $400    (is05, 59D)
    7.5 HP 220/440V  1750 RPM, frame 254V  Wagner, ;  $350     (is45, 60B)
    10 HP 440V  1100 RPM, frame  C405, Reliance $500  (is24, 34D)
    10 HP 440V  1750 RPM, frame  324, GE  $350     (is50, 60A)
    15 HP 440V  745 RPM, frame  326, GE $750 (is25, 19D)
    15 HP 220/440V  1750 RPM, frame  284U, Electro Dynamic  $750     (is29, 16D)
    15 HP 220/440V  875 RPM, frame  RS365, Fairbanks Morse $750 (is32, 17D)
    15 HP230/460V, 1740 RPM, frame 284U, Electro Dynamics,  $750      (is42, 60D)
    15 HP 220/440  1750 RPM  sleeve bearing  $750     (ics)
    20HP 440V,  1750RPM, GE, frame 364    $800       (is06, 34D)
    25HP 440V,  1750RPM Wagner , Frame 405,  Qty 2    $850    (is07, 29D)
    25 HP 220/440V,  1500 RPM, US motor, vertical shaft pump style motor,  frame 404-4 $850    (is21, 36D)
    25HP 208,220,240V  1200RPM, frame 364U, US Motor uniclosed    $900    (is30, 16D)
    30 HP 220/440V, 1750 RPM, frame 326U,  US Motor,    $900     (is39, 59D)
    30 HP 220/440V, 1750 RPM, frame 256T,  US Electric,    $900   (is40, 59D)
    30/7.5 HP 1800 / 450 RPM   2 speed, 440V 38/16 Amp 3ph, Westinghouse Vertical,
    Frame S445, SN 16-1B9260, Navy spec. 17M10A, $2500      (op08)
    40 HP 220/440V, 1750RPM, Continental Electric,   $1000     (is31, 17D)
    40 HP, 230/460V, 3515 RPM, frame 286TS, Lincoln  $1000      (is43, 60C)
    40 HP, 230/460V, 3600 RPM, frame 365, US Motors   $1000     (is44, 60D)
    50 HP 220/440V 1180 RPM, Louis Allis,  Frame 504, $1500  (is09, 14D)
    50 HP 440V 1175RPM,  Drip proof Energy Efficient. Frame 365T,
    Contactor &box mounted Reliance,Qty 2 $2000     (isdk10)
    50 HP 230/460V 1750 RPM, frame 326T, Reliance,    Qty.  2  $1000   (is41A,B, 60C)
    60 HP 460V , 1750 RPM,  TEFC Westinghouse, frame MACF364TS  $1000  (is11, 35D)
    75HP 220/440V, 1750 RPM, TEFC, Frame 444US, Louis Allis $1500     (is12, 59E)
    75HP 220/440V, 498RPM, Frame SF686, Fairbanks Morse ,    $2000     (ofdk13)
    75HP 230/460V 1775 RPM, verticle motors , Frame A4444UP, US MOTOR , uniclosed, Type RV, Design B,
     Code F, Model s.f.1.0,  SN C1002255, Thermally protected,  one without angle drive  $3000    (opdk14)  one w/angle
       drive for aux.drive to pump Angle drive:  Johnson Gear & Mfg. Co. mod SD 90, SN 43631, ratio 1:1, 70BHP@1160,
       2" shaft in and out. $4000 pic      (opdk15)
    130 HP  440V, 1100/1800 RPM, GE   NEW in crate Qty.  2   $5000  (op16,17)  pic
    150HP 440V, 3555 RPM, drip proof, Frame CA505S ,design B , cont. duty,   Reliance, $8000 (opdk18) pic
    150HP 440V, 705 RPM,  frame RS684,  Fairbanks Morse, tripple drum winch drive $6000  (op23)
    200HP 440V, 705 RPM, 3-phase GE $6000 (ydk)   pic
    200HP 575V 194A , 1190 RPM, Frame 507U,type BAO,Ball bearing,   Reliance  $6000   (opdk19)
    250HP, 440V, 3 phase, 60 cycle, 705RPM, FL Amps 369, GE Slip Ring Motor, Type MA Fame6336,
      Time rating 1 hr., Semci Factor 1.0 Code, Sec volts 281, sec Amp 400, AISE Frame size AC 50,
      Model 5MA6336FAF1, Ser# AC8359636, double ended w/ brake drum   $6000 (kydk)
    400HP 460V, 600 RPM, 467 amp., Model CW SN:1976816A, S.F.1.15, Sec Volt 725, sleavebearing Westinghouse     $6000   (kydk)
    400HP 2200V, 1188 RPM, Frame 32C,  drip proof, Sleeve bearing,  Westinghouse $8000  (ofdk20)

  Electric motor "vari drive" variable speed
    1.5 HP  220/440V,  11-56 RPM   Horizontal config.  US Electric Motors $300  (is01, 28D) pic1 pic2

    1 1/2 - 3 HP,  220 V,  2 speed motor  1725/855,  140-280 RPM or 70-140, size 3W22-V1G-18\9,
            vertical w/Right angle shaft output,  Reliance   (is3, 24D) $300 pic

    2 HP  220/440V,  390-770 RPM,  frame  22-252-20  Horizontal config. US Motors $500  (is02, 28D) pic1 pic2

    3 HP 220/440V  41- 125 RPM,  frame 23-213-30,  horizontal config. ,  US Motor varidrive     (is5, 22D)  $600 pic

    10 HP 230/460V  93-280  RPM,  frame 30-215T-313A,  vertical config.,   Louis Allis    (is4, 23D)   $800 pic

     30 HP GE 600 rpm, $XXXX pic1 pic2 pic3
 

Electric Motors  DC
   Up to 5 HP  $100/HP
   Over 5 $75/HP
   Over 10 HP   $60/HP
___________________________________________
    1/6 HP 230VDC 1140  GE ,  frame 56,   $50     (isdk70, 20C)
    1/2 HP 115VDC 1750  GE     frame 56,   Qty 9  $100 ea.  (isdk51, 20C)
    3/4 HP 115VDC 1750 Baldor some new some used Qty. 7, 4 lead shunt 6 lead compound   $200 ea.  (isdk52)
    1 HP 230VDC 1750RPM, frame 203, GE,  $300      (is73, 21D)
    1 HP 230VDC 1750RPM, frame 225, Louis Allis,   $300      (is78, 13D)
    1 HP 230VDC 1150RPM, Electric Machinery ,  $350     (is76, 22D)
    1 1/4HP 230VDC 3450RPM, Century , $200     (is77, 22D)
    1 1/2 HP 120VDC 1750 RPM Baldor     Qty 2  $250 ea.     (isdk53)
    1 1/2 HP 115VDC 1750 RPM GE ,  frame ?? Delaval purifier , $2000    (isdk69, 16D)
    1 1/2 HP 115VDC 3450 RPM, Stab shunt, $250    (is66, 22D)
    2 HP 230VDC 1200RPM, frame D-225, Electro Dynamic, Qty 3  $250 ea.     (is62 28D,63,64 21D)
    2 HP 115VDC 350 RPM   ,steering motor ,double end drive, brake on one end,   NEW and used  Qty 4    $3000 ea.  (is67A, 15D, C, D 18D, E 35D)
    2 HP 230VDC 1750RPM, shunt GE ,  $800     (is75)
    3 HP 115VDC 1300RPM, frame 334, Century Electric, Qty 2  $800 ea.  (is68A, B 13D)
    5 HP 230VDC 1750RPM, frame 254,  stab shunt, GE,   $800     (is74, 22D)
    7.5 HP 120VDC 1750RPM,type SK, frame 43, stab wound, SN:90-3B4309 
    7.5 HP 120VDC, 57AMP, 1750 RPM Westinghouse frame 43, Type SK Marine stab sh Ser # 90-3B4309 Westinghouse  $100  (is)
10 HP, 240 VDC, 1200 RPM, 38 amps, Type 3 BH DC, Frame BHDP, Arm 110, SN:73920,
10 HP 240 VDC, 38 AMP, 1200RPM, C Wheeler Frame BHDP, Type 8BH Ser #73920 ARM 110 Volt

C. Wheeler, rebuilt by Franklin    $1000  (kydk)
    15 HP 115VDC 650 RPM, Type EB90, Allis Charmers  Qty. 2   $900 ea.  (is61, 36D)
    25 HP, 240VDC, 89AMP, 1800 RPM, GE Frame 83 Type CD, Ser #80712 ARM 220Volt
    25 HP 115VDC, 1150 RPM, Frame 93, GE   $1500     (is54, 20D)
    25 HP 115VDC, 1550 RPM, $1500  (is55, 23D)
    25 HP 115VDC, 1200 RPM, $1500  (is56)
    25 HP 230VDC, 1200 RPM, Stab. Shunt,  W/shaft break and Controller   (cargo winch)  (is57)
    25 HP 115VDC, 1400/1750RPM, Century Electric,   $1500     (is72, 22D)
    25HP 240VDC, 97amp, 1750RPM, Century Electric Qty. 2, Fram 37 type DN serial #73918, driving gear box     $1500ea. $2000 w/ gear box ea. (ofdk)
    25 HP 240VDC, 1800 RPM, Frame 83, Arm 220, SN:80712, Type CD DC, GE, rebuilt by Franklin  $1800  (kydk)
    30HP 900/1200 RPM,  shunt wound, Century Electric   $2000     (is58, 16D)
    30 HP 230V, 1750 RPM, $2000  (is65, 34D)
    35HP 1800 RPM, 140 amps, Volts 240 Armater 245 Field, SN:731021, Frame 444-2, Allis Charmers, Type OGNA     DC, rebuilt by Franklin     $2000  (kydk)
   35HP, 240 VDC, 140Amp, 1800RPM, Allis Frame 4442, Type Ogna, Ser# 731021 ARM225
   60 HP  230VDC, 450-900 RPM, compound,  Frame 25S, SN 216189,   Electro Dynamic Co. NJ    $3000     (is59)
   62.5 HP 115 VDC, 1750 RPM, Frame 123L, Shunt wound, Westinghouse   $3000  (is60, 13D)
   100 HP GE 240 VDC, 600/1200 RPM, 220/75 field volts, 341 amps, Type CD, Frame 1441, SN 78426, $3500     (dky)   pic
   250 HP  240VDC  1900 RPM, size JHLL, Compound wound, Drip proof, Ball bearing, Type CCM,
      Crocker Wheeler mfg.    Qty. 4  $5000 ea.    (of61)  used as is price
    125VDC, KW 3, Amp 24, 1750RPM, Duty DPSE Cont 40 deg. celisus, 1943 SEP Exc Franklin Rebuilt   $3500      (kydk)
 

Electric gear head motor  pic
    Small,  Right Angle, 172 RPM,  11" lbs. torque  $35   (is1)
    1/4 HP 115/230V,  58RPM, Right Angle GE, 7GF712EN3KP81   $150 ea.   (is 2, 30C)
    1/4 HP 220V,  48RPM, Right Angle worm drive, frame 5820RW,   Master,   3/4" shaft   $150   (is 6, 30C)
    1/3 HP 440V  11 RPM, Right Angle, frame  5825RC   Master  $150  (is3, 30C)
    1/2 HP 220V  420 RPM, Inline offset, Master  1" shaft $150   (is5, 30C)
    1/2 HP 115/230V,  1 1/3RPM 1200:1, Inline offset, frame 56--5, Ajax motor, Baldor gear, .875" shaft   $150  (is 8,     30C)
    1/2 HP 220/440V,  300/1750RPM 2 shaft, Inline offset, frame 7418SP,  Master   3/4"motor 1" gear shaft Qty 2       $150    (is13, 29C)
    1/2 HP 220/440V,  79 RPM, Right angle worm drive, frame 7412 WRW,  Master $150   (is20A, B, 21D)
    3/4 HP 208/440V,  ??RPM, Right Angle worm drive double side shaft, frame 56C 513M, Baldor,   1" shaft  $150      (is     9, 30C)
    3/4 HP 208/440V,  146RPM, RA worm drive , frame J56-C, Century/Perfection,  Model VAC9189S   1" shaft       $150    (is10, 30C)
    3/4 HP 220/440V,  69 RPM Right angle worm, frame F56-C,   Dayton,   1" shaft $150   (is14, 29C)
    1 HP 440V, 520 RPM, Inline offset,  frame 595-10, US Motor,  .937" shaft  $200   (is4, 30C)
    1 1/2 HP 230/460V,  146RPM, RA worm drive , frame P56-C, Reliance/Perfection,  Model VC9187S 1" shaft      $250   (is11, 30C)
    1 HP 230/460V,  45 RPM, Right Angle worm drive , frame 143T-6, Dayton   1" shaft $200   (is15, 29C)
    1 HP 180VDC,  87 RPM, Right Angle worm drive , frame FE56-C, Reliance  $200  (isdk16, 30D)
    1 1/2 HP 220/440V,  144RPM, Right Angle worm drive , frame CM56W-216RL, Electra Motors $250  (is12)
    2 HP 230/460V,  56 RPM, Inline centered w/brake , frame 145T-21, Syncrogear/Dings dynamics  $250  (is17, 30D)
    5 HP 440V,  59 RPM, Inline offset, frame 284, Stirling system   $500  (is19, 30D)
    15 HP 110Volt field, 1200 RPM, frame 83, Type CD DC 240volt 55amp, SN:73716  GE,
       Gearbox: Falk , Model:7.525EZ2-06A7, Ratio 17.59 to 1, HP 7.5 Class 2  $350   (is)
    15 HP 110Volt field, 1200 RPM, frame 83, Type CD DC 240volt 55amp, SN:73919  GE,
       Gearbox: Foote Jones Jeffery Gallion Inc., Model:723XSL SN:IX 97747, input 1150, 7.59  $350   (is)

Electric Motor Generators
    150W  30 VDC, 5 amp, 1725 RPM, compound wound, Type ZD, frame 145,  s.s.no. ZD145-2,  Motor info.  1/3 HP      115V  1ph. 6amp. ,
     Frame 145 type ZT,  SS  ZT145-2,  DIEHL Mfg. Co.   Qty.  3 $75   (is1, 59B)
_____________________________________
    185W  120VAC 1.56amps, Type MG353P, comp. winding, cont. duty, 3600RPM  S/N 1K7444, Motor info.  .35 HP     115VDC,
    4 amps, Type MT# Electric Specialty Co.   $100   (is2, 59B)
_____________________________________
    45W  110V  .68amp, 400 cyc. .6PF, 3 PH, duty cont.  75deg rise,    Motor info.   1/6 HP  117V 3ph. 60Hz 1.5amp.     3430 RPM,
    Type AS41G/AA2, No. 67J9457, Electric Specialty Co.   $50     (is3, 59B)
_____________________________________
    500W  13 / 26 VDC Electrolux Corp.  Type CAJO211444,   motor 105-130VDC  6 amps. $200   (is4, 59B)
_____________________________________
    165W 115V  3ph.  0.4amp  0.8pf.   Motor info   1/2 HP 115V 6 amp.  1ph 60Hz, 3500 RPM 24V excitation     Submarine Signal Co.  $100  (is5, 59B)    
_____________________________________
    750 - 360 watt, Continental AC drive 3 phase, 2 speed unit, 220V, DC out 250-120volt 3 amp.(is10, 59B)
_____________________________________
     1KW, 230 VDC in, 115/125 AC 60 cyc out, Navy unit about 4' long, 16" wide and high, (is13, 15D)
_____________________________________
    1.5KW  87V  1750 RPM, shunt wound generator only, Fairbanks Morse &Co.  $50  (is6, 59B)
_____________________________________
    1500W  32VDC  4 amps, frame 210C85,  Model 105U3A-232/A,  Onan Generator only $400  (is7, 59B)
_____________________________________
     3KW DC 125-140V, 21 amp output, AC 5hp 240/480v 3 ph. input,   EP  like new (is12, 59B)
_____________________________________
    4-2KW 200-100VDC 2 ampo 1750-850RPM, frame D202D,   3/4-3/8 HP 220V 3ph. 3-1.5 amp. frame PW66D     Peerless Electric Co.    $25  (is8, 59B)
_____________________________________
    7.5KVA 440V 9.8A  3ph.output, 10HP 105-130VDC input,  Qty 4  new    $2,500  (is) _____________________________________

    Lincon welder MG (is11, 59B)
_____________________________________
    2 ea.  Generator End: 25 HP, 240Volt Arm, 200 Field Century, TypeDN, DC, SN:73615, Frame 374 Motor End:  30     HP 230/460V, 72/36 amp., 1760 RPM, 3 phase, Frame 286T, S.F. 1.15 Cont Model# 5K286AN205A $600  (is)
 

HOME
inventory engines to instrumentation
inventory port holes to winches