inventory portholes to winches

HOME
inventory air compressors to electric motors
inventory engines to instruments

Port holes, port hole:
various parts and odd types too, used glass etc.   sample pic
10" port hole glass only, 3/4" thick, scratched and some chips on outer edges, approx. qty. 80 $20 ea.

10" Plexiglass 1" thick, new Qty. 6 $40 New glass runs $60 - $80 just for glass install is seperate

16" glass 3/4" thick $35

16" new plexiglass 1" thick $50

    Complete assembly:
    10"   $300   (is)
    12"   $400 (is)
    14"   $500   (is)
    15"   $550   (is)
    16" Brass 4 dog $650   (is)
    16" Brass 4 dog w/cover $650   (is)
    16" Brass, 2 dog   $650   (is)
    16" Aluminum, 2 dog $400 Qty 43 beveled edge and 14 straight edge   (is)
    18" Brass qty. 3 $1000   (is)
Square aluminum
    23" X 16" four dog qty 3 $600   (is)

not really port holes, 4.5" inspection port, Brass, heavy flange/glass $250

not really port holes, 6" window with wiper, cover that opens $250

Propellers, propeller: all bronze 3 blade, except where noted, diameter, pitch, shaft bore, Hub depth in inches, RH or LH
17" dia,     P15, bore 1 3/16",      Hub 3 1/4"     RH Ni Brial   Michigan   like NEW $300   (is34)
18" dia,     P??,   bore 1 3/8",      Hub 3 5/8",     RH like NEW $350 (is28)
18" dia,     P18,   bore 1 1/4",      Hub 3 1/2",     RH Cooledge dinged up some    $350 (is35)
19" dia,     P??,   bore 1 3/8",      Hub 4 ",          LH like NEW $400 (is17)
19" dia,     P17, bore   2",           Hub 4 3/8",     RH like NEW $400 (is18)
19" dia,     P17, bore 2 1/4",       Hub 4 1/4",     RH dinged up some $400 (is19)
19" dia,     P17, bore 2 1/4",       Hub 4 3/8",     RH like NEW $400 (is20)
19" dia,     P17, bore 2 1/4",        Hub 4 1/4",     RH like NEW $400 (is22)
20" dia,     P23, bore 1 3/8",       Hub 4 1/2",     RH NEW $500 (is1)
20" dia,     P23, bore 1 3/8",       Hub 4 1/2",     RH NEW $500 (is2)
20" dia,     P16, bore 1 11/16",   Hub 3 7/8",     LH dinged up some $500 (is26)
20" dia,     P17, bore 1 1/2",       Hub 4 1/8",     LH   like NEW $500 (is27)
20" dia,     P17, bore 2 1/4",       Hub 4 3/8",     RH   like NEW $500 (is21)
20" dia,     P17, bore 2 1/4",       Hub 4 1/4",     RH   like NEW $500 (is23)
20" dia,     Pxx, bore 1 3/8",       Hub 4",     LH   like NEW Chris Craft $500 (is37)
21" dia,     P20, bore 1 15/16",   Hub 5",           RH Dinged up some   $550 (is14)
21" dia,     P16, bore 1 1/2",       Hub 4 1/4",     RH   like NEW $550 (is25)
22" dia,     P26, bore 1 3/8",       Hub 4 3/8",     RH   NEW $600 (is30)
22" dia,     P15, bore 1 1/4",       Hub 4 3/8",      RH like NEW $600 (is9)
22" dia,     P20, bore 1 15/16"    Hub 5",           RH like NEW $600 (is16)
22" dia,     P18, bore 1 3/8"        Hub 4",           LH like NEW $600 (is36)
23" dia,     P??,   bore 2 1/4",       Hub 4 3/8",     RH Dinged up some $650 (is15)
23" dia,     P21, bore 1 3/4",       Hub 4 5/8",     RH like NEW $650 (is24)
23" dia,     B6133, bore 2 1/4",   Hub 4 3/8"     LH like NEW Cooledge $650 (is38)
23 3/4",    P23,   bore 1 13/16",   Hub 8",            LH like NEW $700 (is6)
24" dia,     P17, bore 2 1/16",     Hub 4 3/8",      RH like NEW Qty. 2 $700   (is7,8)
24" dia,     P17, bore 2 1/4",       Hub 4 3/8",      RH dinged up some $700 (is10)
24" dia,     P24, bore 1 3/4",       Hub 4 1/2",     RH like NEW Qty 2 $700   (is12,13)
27" dia,     P??, bore 1 3/4",       Hub 4 3/4",     RH like NEW $800 (is11)
33" dia,     P22, bore 2 1/2",       Hub 6 1/4",     RH like NEW $900 (is3)
38" dia,     Pxx, bore 2 1/2",        Hub 7 1/2",     RH dinged four blade $1000 (is39)
44" dia,     P40, bore 1 7/8",       Hub 7 1/2",      RH like NEW $2000 (is5)
46" dia,     PXX, bore 2 1/4",       Hub 9 1/4",     LH like NEW $2500 (is4)
48" dia,     P2.667', bore 5",        Hub XX",        RH like NEW $2500 (iw31)
48" dia,     P2.667', bore 5",        Hub XX",       LH like NEW $2500 (iw32)
55" dia,     P2.7892', bore ?",      Hub XX",       RH like NEW $4000 (iw33)
84" dia,     Miki Tug, Federal Mogul Marine        RH NEW      $5000 (is31)

Propeller shafts:
    9.5" X 25'5" tail shafts   Qty. 2     $1.00/lb. (op)
    9.5" X 28' shaft    $1.00/lb. (op)
    10" X 29"11 3/4" NEW not machined $1.00/lb. (op)

    Cutless Bearings:
1 3/4" X 2 5/8" X 7"   Brass NEW   Qty. 2    $35ea. (is4, 29A)
1 3/4" X 2 5/8" X 4 1/2" Brass NEW   $35   (is5)
2" X 2 5/8" X 8"   Brass Good condition   $50   (is3)
2 1/2" X 3 3/8" X 10" Bronze back    $75 (is2)
2 1/2" X 3 1/8" X 10" Fiberglass housing, Goodrich Qty 16 NEW    $75   (is1,29A)
4 1/4" X 5 3/4" X 17" flanged    1 1/4"wide, 1/2" thick 4 - 7/16" holes good condition    $200   (is6)
5" X 7" X 22"   Brass, like new   $300   (is7)
6 3/4" X 8 3/4" X 24" Flanged, two piece Brass, NEW Qty. 2    $500ea.    (is8,29A)

Kingsbury shaft bearing w/thrust, 7" hole, Size 13 1/2" Drawing # 462780 ord # 2655
'REC Oil Vis. 5.00 saybold @ 100 deg. F - NEW Qty 2 $500 (ics)

Packing:
Surplus Chesterton packing, lots of sizes and types please call for information
1 RL asbestos packing 516ft, 3/8" diameter
1 RL Graphite Packing 1/2"x1/2", 250ft
250 ea. 5330014122769 Preformed packing
6 RLS 372' ea. Packing material 7/16" graphite
30ft 7/16" Graphite packing
4 RLS 7/16" Graphite packing, 50+ per roll
10 Sets Packing assy, 1 5/8"x3x5/8"
34 ea 5330-01-173-6724 set of 6 5/16"x5/16" Graphite
112 rolls Graphite Packing 1/4"x1/4" Avg Ft per rl 40'

Pumps, centrifugal, split case, gear, vane etc.
most pumps have packing gland seals unless noted, however if a mechanical seal will make the sale CSI can adapt these
to nearly any pump with factory precision.
Centrifugal

Centrifugal, split case: about two dozen or more split case pumps, used, reconditioned and new various sizes. $200 to 2,000ea. (oec)
Bronze, 3X3.5X12" 2 stage split case, no brand, tapered drive shaft

Buffalo, bronze, split case, 8X6 X 12-14" new $3000

Positive displacement Pumps:
6" Viking pump 595 GPM, Model 353 good for black oil and heavy crude steam heated packing gland, requires 25HP New $2,000 (oec)

Roper $1,200 (is)

Steam Powered Reciprocating pumps, various sizes. $250 to 1,500ea. (oec)and(of)

Pumps with electric power

1.5 HP 50GPM, 45' Head, Hydro Flow(of)

two cylinder recip piston , John Bean Model 38-5.5, 5.8 GPM @ 400 psi,
3 HP 220/440V NEW $500 (iwdk)

1 1/2X2" Peerless, 6 stage , TH32-6, 40 HP, 220/440V, 3550 RPM,
Baldor motor TEFC good used. Qty 2 $500ea. (ofdk) pic

several DCV motor pumps ranging from 3/4 HP to 2 HP $150 to 250ea. (is)

1 3/4" 6 hole flanged bronze pump, Diesel oil transfer pump, 3 HP 115VDC 23.6 A, 1300 RPM, stab. shunt,
SN 5X21401, marine duty. on a skid OAL 53" W 16" H 21", NEW Qty. 5 $800ea. (op)

2.5 X 3" Split case, 2 stage 100WPSI, T.H.D.250, Bronze, Economy Centrifugal pump, Hamilton Ohio,
SN A329, 25HP, 115VDC 185Amp, stab. shunt, Model 33A1610, cont. duty, 1750 RPM, GE, NEW $2,500 (op)

4X5" Worthington split case, 30 HP, 220/440V, 1750 RPM $600 (ofwedk)

6X6" Bell&Grossett, 6X6X93/4-B Qty. 1 $1,500 (ofdk) pic

6X8"X 15.5" Peerless split case, 6AD 16 1/2, 125HP, 460V, 1770 RPM, US Electric motor, good used Qty 1 $1,000 (ofwedk)

10X12X?" Pacific Pump, split case 125HP. 1750 RPM, Lincon Motor, 3300 GPM 94' head. (ofdk)

12X12 Lampson, 50HP (ofdk) pic

24" transfer pump, 125 HP electric driven, Worthington , 19,000 GPM, 15 Ft HD. $6,000 (ofdk) pic

Submersibles:

3" 230/460V 20/10 Amp, 10HP, 3450 RPM, 295 GPM @ 160 head, ABS Pump, Qty 6 used $1200 (dk)

8" 220/440V, AMPS 38/19, 14HP, Flygt Model 3152.180, S/N 8322049,8322050 Qty 2 used $4000(ofdk)pic

Bingham huge submersibles like new, air cap over motors, type SVD, #1 No. 75B71195 ft. hd, 600 GPM 8X4", . #2 No. 7573, 140 ft. hd. 1000 GPM 8X5" ,

Pumps with engine power
2" constructon pump, open impeller, Jaeger pump w/ Briggs engine, 8 HP $500 (ics)

10" trash pump, self priming, diesel driven w/471 Detroit, 15,000 GPH 80' head
completely reconditioned, Qty 2 $12,000 (op & iw) pic

8" Rubber lined pump, 8V71 detroit diesel, radiator cooled. 3000 GPM, 150'. head
Used in good condition $15000 (opdk) pic pic2

5X6" split case centrifugal, Gardner Denver pump, Chrysler Gasoline engine $1,000 (of)

6X8" X15" split case centrifugal, Detroit 6-71, direct drive, used $1500 (ofdk)

High pressure triplex pump , 4 Cyl. Nissian diesel Model CN33, ND model SD2210, S/N 4 88 53, rated 36HP cont. output @ 2600 rpm. Pump Triplex pump, Model PS250, S/N 590541, Max press 5000, Max working PSI 3500, Pump RPM 500, GPM 12, Good used, no hose or gun. $4,500 (opdk) pic

High pressure triplex pump, Tritan, 353 Detroit engine, 253 total hours, S/N 6554 Model # 331055, 2.5 gal. oil capacity, 500RPM, Plunger Pump, 750 plungers, S/N 6554. Pres. 10,000PSI, 10 gal/min $6000 (outdk) pic2 pic3 pic4

Gorman Rupp 6" Diesel Driven pump, 471 Detroit engine direct coupled, self contained, radiator cooled, fuel tank skids, model 16A2 DD172 ser # 291437N, 2000 GPM @ 60 psi, 140 ft. head. Low hours $8000

Rigging, marine
Cargo nets, Hemp and Nylon. Moderate sizes $50-100ea. (iu)

Crane blocks, various types and styles. $350 - $1,000 (op)

Rope:

21/2" Nylon line, used, excellent for décor or recreational, Approx. 200' $3/Ft. (op)

1 1/4" Manilla rope mics. lengths $2/ft. (iu)

Steel, materials etc.

from 11/13/07
plate new 0.75 # from CSI 0.5
Round bar HR $1/# CR $2/# from CSI 0.75
square tube, 1 1/2" is $1.83/ft.

Strainers and Valves:
smaller items not listed, please inquire

Simplex or single basket strainers, duplex next section

Size Brand Material Connection Basket identifier Price

2" -- Stainless flanged 4hole 1/16 SS oec1dk $100

2" fabricated Steel not drilled none oec14 $600

2 1/2" fabricated Steel flanged 6 hole bronze 3/8 oec 7 $400

3" fabricated Steel flanged 4 hole steel 1/8 oec8 $450

3 1/2" Zurn Bronze
flanged 8 hole
bronze 1/8 oec 2 $600

3 1/2" -- Bronze flg not std. 8 hole bronze 3/8 oec 15 $600

4" Tate Cast Iron flanged 8 hole SS 1/4w scrn oec16,17,18 $500

4" -- Cast steel flanged 8 hole large steel 1/4 oec3,4,5 $500

4" fabricated Steel flanged 8 hole large steel 1/4 oec6 $500

4" --not complete Cast steel flanged 8 hole steel 3/8 oec9,10,11 $350

4 1/2 " Zurn Bronze flanged 8 hole bronze 1/8 oec 12 $600

4 1/2 " fabricated Cast steel flanged 8 hole bronze 3/8 oec 13 $600

6" Keckley Cast steel flanged 12 hole none oec19 $900

Duplex or double basket strainers with selector valve

Size Brand Material Connection Basket identifier Price

1 1/4" Purolator Brass flanged 4 steel oec $1400

1 1/4" Purolator new 2 ea. Cast screwed steel oec $700

1 1/8 port Kraissl Cast Steel 1 1/2 flanged 4 SS 1/16 oec10
$700

1 1/2" Coen co. Cast steel flanged 4 steel 1/16 oec12 $1100

2" Coen Cast steel flanged 4 steel 1/8 oec9 $1200

2" Elliott Bronze flanged 6 SS 1/8 oec19,20 $2250

2" Hayward Bronze flanged 4 SS1/8 oec24,25 dk $2250

2 1/2" Coen Cast steel flanged 4 steel 1/8 oec8 $1250

2 1/2" Kraissl Cast iron Screwed bronze 1/16 oec13 $1250

2 1/2" Kraissl Bronze flanged 4 bronze 1/16 oec15 $2500

2 1/2" Kraissl Bronze screwed SS 1/8 oec24 $2200

3" -- Bronze flg not std.6 hole bronze 1/8 oec14 $3400

3" Staples&Pfeifeer Bronze flanged 4
no baskets or caps
oec16 $3000

3" Cast Iron flanged 4 SS 1/8 oec26 dk $1600

3" Turl Iron Cast iron flanged 8 oec23 $1600

3 1/2" Dri-Steam Cast steel flanged 8 steel 1/16 oec21,22 $2000

3 1/2" Dri-Steam Cast steel flanged 8 SS 1/16 oec6 $2000

3 1/2" Andale Cast iron flanged 8 bronze 1/8 oec7 $2000

4" Zurn Bronze flanged 8 bronze oec17 $4300

4" Hayward Bronze flanged 8 SS 1/8 oec3,4 $5000

5" Andale Cast Iron flanged 8 bronze 1/16 oec2 $7000

5" -- Bronze flanged 8 SS 1/8 oec5 $6,000

5" -- Bronze flanged 8 bronze 1/8 oec18 $7,000

6" Andale Cast Steel flanged 8 bronze 1/16 oec1 $10,000

Valves,

Smaller valves 1" to 3" threaded, brass, new and used.

new and used 2,3,4,6 and 8" Cast Iron, Cast Steel, flanged valves

8" bronze 90 deg. flanges
8"bronze 90 deg. elbow

Worthington controls 6", 2 way, pneumatic positioner flow control valve NEW

Fisher Controls 4", 3 way, pneumatic positioner, flow control / mixing valve NEW

Stainless Steel, 400 psi steam, 700 deg. F, 4" NEW

Powell 4", 150 psi, Stainless steel,

Consolidated safety relief valve, 4"X6" 155 PSI, used needs reconditioning

Consolidated safety relief valve, 2"X3" 120 PSI, used needs reconditioning

Fire sprinkling system, Double check, double shutoff, assembly. spring checks are ZURN 3", manual valves are CLCW with UL approval stickers, 2 1/2" everything like new

TOP

Tanks:
   Liquid Hydrogen storage tank, Gardner Cryogenics, 1,545 gallon water volume, Max WP 150 PSIG @ -425 Deg F,
   Built 1984   S/N 2667-83, National Board No. 480, Model number GCD 1500B-HCS-N2 -M $49,000 (op)(dk) Pic
____________________
   Hydraulic tank w/filters, temp indicator, cleanout panels 24H 20deep 36"W   $250 (of)
____________________
   Expansion tanks, various sizes and types $150 (of)
____________________

1000 Gal. anhydros amonia tanks, 11ft. long, 40in. diameter, 250psi manufactured 1994. Qty. 2 $2500 each.
____________________

Compressed Natrual Gas CNG tanks, various sizes, steel, 250 -500 Cube foot capacity, 2400 PSI, DOT rating. $100 each.

CNG tanks good for 3600 psi steel and composite tanks

Tools:

drill bits, reemers, rock bits, pavment breaker bits, Jack hammer bits,

Rock drill bits, hundreds of new thread on 1 1/4" internal thread some 1", several sizes 1 3/4" mostly, $2 each quantity discounts

air tools:
   All extra heavy duty Drills w/Morse taper $500ea. (is)
   Circular saws, angle drive 12" Qty 2    10" Qty 1 $500 ea. (is)
   impact wrenches   3/4"   $200   (is)
1 1/2 ton, chain hoist, Gardner Denver   size HV86-2V-20   SN K48159   $400    (is)

hand tools:
sockets, 1 to 2 1/2" 3/4 and 1" drive, some new some re-plated
wrenches, drills, taps, reamers, new and used $5 to 30 ea. (is)

Blacksmith: Bending slab 5' X 5' X 6" Hard to find. $500 (owodk)

Power tools:
Vertical router, wood working tool. 24" X 24" Tilting Table $1000 (iw)

Platen press 4 X 4' table, 20 Ton capacity $2500 (iw) pic

Spindle Shaper 1 1/4 spindle 26" X 38" Table $1500 (iw)

Machine tools:

OB and Punch press, 15T $1500 (iw) pic

Horizontal Mill small $500 (iw) pic

Engine valve grinder, heavy duty, up to 6 1/2" diameter & stems up to 1 1/4", Attachments for small valves still available,
Sioux Model 682, Current model no. 956 still available, 440V 3 ph. 740 lbs. 35X23" base dimensions Qty 2 $2,500 (iw) pic

Winches: general order, number of drums then from smallest capacity to largest

Small hand driven winches 2 to 5 ton   used and reconditioned.$800 (iw)   pic
Small hand driven Bee Bee 2 Ton Duplex 4" wide drums on common frame and independantly operated $1000
Small hand driven Bee Bee 2 Ton with 10" wide drum $600
Small hand driven Boom hoist with 3ft boom $400
_______________________
   Large hand driven winches, wire storage reels. various states of repair, Qty. 6 $600-1000 ea.   (of)
_______________________
   Air Tuggers:
   Gardner Denver approx 2000# pull, $1000   (is40)
   Joy model EF 111   (is41) $1200
   Ingersol Rand model EW111, drum and housing no motor, like new $800   (is42)
   Ingersol Rand model EW111, 2000# pull, 55 FPM, $1250    (iw43)
   Ingersol Rand model EW111, 2000# pull, 55 FPM, reconditioned $2250    (iw44)
   Joy   model EF111, w/air cylinder on brake bands, qty. 2 $2000    (ofdk39A,B)
   Joy,6,400# pull, mach. 25498, class LF 111, 125 FPM line speed $3000 (ofdk24A) pic
   Joy model   LF112, $3,000   (ofdk24B) pic2
_______________________
Single drum research winch, Hydraulic drive, 7.5HP electric hydraulic pump, special wire guide system, 15X10X6, $6,000 (ofdk16)
_______________________
Wire line winch, B W , Housed control room, Cummins diesel powering hydraulics,    $16,000 (ofdk) pic pic2 pic3
_______________________
Single drum, large Bulldozer style , Military surplus, w control levers, New   Qty 3 $2500    (is)   pic

Conventional open gear winches

Winch language, WF = water fall, FD = friction drive, BB = brake bands, DD = dogged drum/s, all babbit bearings unless noted, all reconditioned unless noted. Most are not powered (power specified by customer requirements)
Dimensions in inches for the drum/s Width X Center diameter X flange height

Single drum winches
   Single Drum FD, DD,BB, 9X13X5 fairly stout little winch, $4,000   (op31)
________________________
   Carog winch, single drum, 15HP 230V DC w/electric brake, dogged drive, brake band,   18X18X5 w/gypsy   $6000   (op37)
________________________
   Skaget single drum BU30 3"gear width, FD,DD, BB, 17X13X8, roller fair lead, additional gear reduction, $8,000   (op36)
________________________
   Skaget single drum BU30 3" gear, FD, DD, BB, 17X13X9, w/gypsy, roller fair lead $6,000   (op30)
________________________
   Single drum, two speed gear reducer, 70:1 and 24:1, 4 3/4" shaft, Gypsy both ends, 19X19X8,
    Dog clutch on drive shaft, Reconditioned , Qty 4, $6,000   (of5) pic
________________________
   Jager single drum, 2 speed , dogged drive, BB, 24X20X9, gypsy, brake band, under drum level wind, $6,000   (op25)
________________________
   Washington single drum, FD reversing, 24X12X8 w/gypsy, $4,000    (op35)
________________________
   Skaget single drum, 4"gear, FD, DD, BB, 24X19X8, w/gypsy $6,000 (op28)
________________________
   Skaget BU125 single drum tow winch   w/gypsy, FD, BB, DD, , 24X19x13, electric drive, marine enclosure,
    frame mounted bit, reconditioned, portable tow and dock winch $12,000 (op21)

Double drum winches

   Double drum WF,FD,DD,BB, 11X6X4.5, small pile driving winch $4,000 (op32)
________________________
   Skaget BU15 double drum, WF, FD, DD, BB, 18X10X6, w/gypsys, $8,000 (op29)
________________________
   Skaget BU30 double drum, WF,DD,FD, 17X13X9, w/gypsys $12,000   (op27)
________________________
    Skaget BU40 Double drum, WF,FD,DD,BB,Bab, 17X14X9, not yet powered, w/gypsy, Reconditioned $12,000       (op26)
________________________
   Stroudsburg double drum, FD,BB,DD,Bab, 3" shaft, 20X8X9 model 520 DD $4000 (of3)
________________________
    Skaget BU45 Double drum, WF,FD,BB,Bab, 22X12X8 , straw line, transmission, not reconditioned $4,000 (of4)
________________________
    Double drum, WF,FD,DD,BB,Bab, w/gypsys, 27X15X8, construction hoist, air or steam powered,   not reconditioned     $10,000 (of15)
________________________
   Skaget BU45 Double drum,   WF,FD,BB,Bab, 22X12X8, not yet powered, Strawline,
   Reconditioned needs guardsand brake bands $12,000   (of14)
________________________
   Willamette about the size of a BU45, Double drum, roller bearing, WF,FD,BB,18X14X10, w/Straw line,
    Reconditioned, 6-71 side drive power unit available to couple to it. $15,000   (op22) pic
________________________
   Double Drum, 4 3/4"gear width, 5 1/2 shaft, WF,FD,DD, BB, 24X18X10, $12,000 (op23)
________________________
   Ledgerwood model 8498,   30,000# line cap. single shaft, Double drum w/level winds, gypsys both ends, 6" shaft,
    28X24X14   Gypsies dimensions, 21X24" w/flange diameter of 32", under deck angle drive gear reducer, needs     reconditioning, $18,000 (of13)
_______________________

Triple drum winches
   Ledgerwood Triple drum, WF,FD,DD,BB, 24X16X6, w/gypsys,   $18,000 (op18)
_______________________
   Skaget BU125EL Triple drum, roller bearing, WF, FD, BB, front/rear 24X14X10 center 24X19X12,
    150 HP 440V 60Hz, electric motor drive, good dragline winch, Reconditioned $30,000   (op17) pic
________________________

Capstans:

    AirWinch, horizontal shaft, Air powered, 12X15 gypsy, light weight   $1,200 (op33)
________________________
    Horizontal shaft, drums on both side, 4X10X4 brake bands and Dogs, Tacoma Boat Mod. #H2
D Ord.# 381, 2000# capacity, 39" c-c of the drums, 24" shaft height up from deck, not powered but is configured for easy hydraulic motor mount. .    $1000 (of19)    pic1 pic2 pic3
________________________
    Combination 2 horizontal 1 vertical, hydraulic drive   8" Gypsy $4,000 (op34)
________________________
    Horizontal shaft, drums on both side, 15X15X3 1/2,   3 3/4" shaft, shaft height above deck 25" Gear reducer,
    not powered,   reconditioned Qty. 2 $4,000    (of2A,B)
________________________
    Single Gypsy, horizontal 24" drum positioning winch, Sauerman , Delroyd Reduction gear, 70:1 Model E90, 5 HP,
    230/460V, 1200RPM motor w/brake,   Sterling Power System Inc. frame B215, type ATNE,    Qty 3 $3000 ea.       (ics39) pic
________________________
    Vertical shaft, below deck gearbox right angle drive, 48" above deck, 26" below deck, 20" dia. X 20" wide gypsy w/28" top flange dia., is reconditioned    dia. $8000   (of1) pic1 pic2

Chain Windlass , capstan:

    Vertical shaft, Wildcat and gypsy, 1 1/8" wildcat, Gypsy 29X26" w/32" flange diameter, 4" shaft, through hull drive, no     reduction gear.   $5000 (of6)
________________________
    Vertical shaft, Wildcat and gypsy, 1 3/8" chain, gypsy 14X19" w/24" flange diameter, below deck angle drive, needs     reconditioning   $10,000   (of12)
________________________
    Horizontal shaft winlass, has a frame but no drive means, brake band surfaces, has two 1 1/2 - 1 5/8" wildcats,
     gypsys on both ends,   gypsy dimensions 9X14" w 14" flange diameter. $12,000 (of9)
________________________
    Vertical shaft, Wildcat and gypsy, 2" chain, 16X15" w/20" flange, below deck angle drive gear, needs work $6,000     (of11)
________________________
    Horizontal shaft only no frame, two wildcats 2" chain, good for parts $1000 (of7)
________________________
    Horizontal shaft single winlass, 3" chain, 4 7/8 shaft, frame but no pinion gear, good for parts $800 (of8)

Also we have brake band material, and friction's of various sizes, shafts, gears and other winch parts

HOME
inventory air compressors to electric motors
inventory engines to instruments

Size	Brand	Material	Connection	Basket	identifier	Price
2"	--	Stainless	flanged 4hole	1/16 SS	oec1dk	$100
2"	fabricated	Steel	not drilled	none	oec14	$600
2 1/2"	fabricated	Steel	flanged 6 hole	bronze 3/8	oec 7	$400
3"	fabricated	Steel	flanged 4 hole	steel 1/8	oec8	$450
3 1/2"	Zurn	Bronze	flanged 8 hole	bronze 1/8	oec 2	$600
3 1/2"	--	Bronze	flg not std. 8 hole	bronze 3/8	oec 15	$600
4"	Tate	Cast Iron	flanged 8 hole	SS 1/4w scrn	oec16,17,18	$500
4"	--	Cast steel	flanged 8 hole	large steel 1/4	oec3,4,5	$500
4"	fabricated	Steel	flanged 8 hole	large steel 1/4	oec6	$500
4"	--not complete	Cast steel	flanged 8 hole	steel 3/8	oec9,10,11	$350
4 1/2 "	Zurn	Bronze	flanged 8 hole	bronze 1/8	oec 12	$600
4 1/2 "	fabricated	Cast steel	flanged 8 hole	bronze 3/8	oec 13	$600
6"	Keckley	Cast steel	flanged 12 hole	none	oec19	$900