| Brand name | Description | Price | Picture |
|---|---|---|---|
| Worthington | 2 cylinder, Worthington, Air end, single stage, 96cfm 90 psi max.(ics) | $350 | |
| Ingersol Rand | 250 cfm @ 125 PSI to 175 PSI, Three cylinder two stage, 75 horse power, Electric 240 / 480V belt driven, skid mounted. Qualified Motor, reconditioned air end.(iw) | $4,500 | pic |
| Atlas Copco | 295 cfm, Vee 4 two stage, 75 hp, electric 240 / 480V, belt drive, skid mounted, reconditioned (iw) | $6,500 | pic |
| Ingersol Rand | Three cylinder two stage air end only no power. Rail road compressor Ingersol Rand, 75 HP (ics) | $3000 | |
| Worthington | Air compressor, 3500 PSI, 15 HP 13.5 CFM 4 stage, reconditioned (ics) | $5000 | |
| Smith | portable, engine driven, electric start, "typical of mobile tire repair trucks" 45 cfm good condition (ics). | $2,000 | |
| Start air | Start air compressor 250 psi capacity, w/ 1 cylinder spark engine clutched and electric motor (ics). | $2,400 | |
| Worthington | Start air compressor Worthington 1943 for Cleveland diesel engine 2 cylinder water cooled 600 PSI electric drive 7.5 HP, 114 CFM free air, good condition, (iwcs) | $4,000 | |
| Devilibiss | 10HP Electric 3 phase, 60 gallon tank, (iwdk) | P.O.R | |
| Natural Gas Compressor | Natural Gas Compressor, 3,600 PSI. single electric motor 40 HP, 3 phase, 60hz, twin compressor heads, skidded with standard controls | $36,000 | |
P.O.R = Price On Request, please call us. 253-922-6670 Fax 253-922-2258 |
| Item | Description | Price | Picture |
|---|---|---|---|
| Anchor | 10# navy style | $40 | |
| Anchor | 20# navy style | $40 | |
| Anchor | 40# navy style | $100 | |
| Anchor | galvanized steel | $300 | pic |
| Anchor | Kedge style 30# | $100 | |
| Anchor | Kedge style 130# qty. 3 | $200 | pic |
Unique Item ! |
140# Rod Iron, this is very old, authentic | $650 | |
| Anchor | Kedge, Decor approx. 2500 Lbs (op) | $3,500 | |
Any questions, please call us. 253-922-6670 Fax 253-922-2258 |
Antiques, decor, marine and industrial:
| Item | Description | Price | Picture |
|---|---|---|---|
| Hemp dock fenders "bumpers" 24" round 36" long authentic. (iu) Qty 6 | $400ea | ||
| Bird dogs, cable to log connecting hardware part, unique to North West log rafting and timber harvest. (ows) | $5ea | ||
| Anchor | Brass ship lanterns Polished brass and copper approximately 20" tall (is) Anchor brand, 1 copper, 1 brass | $300 | |
| Ship lanterns Authentic, brass, 4 ea. dome top approximately 20" tall | $350 | ||
| Great Decor Item! | Ship lanterns Authentic, brass, 9 ea. flat top approximately 20" tall | $350 | |
| Authentic corridor type electric light, surface wall mount with protective grid polished 5 ea | $150 | ||
| Authentic corridor type electric light, surface celing mount with protective grid | $100 | ||
| Gimbal lanterns polished brass (is) | $150 | ||
| For the Collector | Deep sea diver helmets replicas (iu) | $1,100 | |
| Small Brass bells 4 1/2" diameter w/anchor mount (is) | $15 | ||
| Own some History | S.S. Himalya Brass bell 6 1/2" diameter | $45 | |
| Cargo hatches, wood planks bound w/steel strap, authentic, good for benches, tables etc. | $50 to $100ea. | ||
See also: chain, anchors, Portholes, Propellers |
pic | ||
Any questions, please call us. 253-922-6670 Fax 253-922-2258 |
| Item | Description | Price | Picture |
|---|---|---|---|
Unique Item! Antique 59 person life boat. |
28' X 9' beam 59 person life boat. Riveted Metal skin, benches and water tanks inside Qty 1 (ofdk) | $2000 | pic |
Any questions, please call us. 253-922-6670 Fax 253-922-2258 |
| Brand name | Description | Price | Picture |
|---|---|---|---|
| Williams & Davis | Vertical tubeless Package Boiler, Size 30 Model 170, 150 PSI, 10 GPH Oil, Williams & Davis, Sept. 1974 Good Condition almost new, W/ expansion tank ASME # 543, Heating surface 96, like new (opdk) |
$3,500 | |
| Ajax Boiler & Heating Co. | 480,000 BTU Gas or Oil, Max. WP 15 PSI, Ajax Boiler & Heating Co. Model SFOX-600 S/N 72-26323, BTU input 600,000, Qty. 2 (ofdk) | $2,500 | |
Any questions, please call us. 253-922-6670 Fax 253-922-2258 |
| Item | Description | Price | Picture |
|---|---|---|---|
| Buoy steel | Round 37" diameter | $125 | |
| Buoy steel | Can buoys, 6' large end diameter, 5' small end, 8'10" tall, 3/8" steel const., foam filled, Pear shape, (ofdk) Qty 4 | $3,000ea | pic1 pic2 |
| Buoy | Can buoys, 5' large end diameter, 42" small end, 82" tall, X are riveted (great decor) Qty. 10 (ofdk) | $2,000 | pic1 pic2 |
| Marker buoys | Marker buoys, 11' long, 23" diameter (ofdk) Qty. 2 | $1,500 | pic |
| Marker buoy | Marker buoy, 9' long, 23" diameter (ofdk) | $1,500 | pic |
| Buoy | Old riveted construction. Pear shape13 ft. long . 4 each 7ft. diameter, Big end. 1 each 9ft. long 5' diameter, Big end | $800 ea. | |
Any questions, please call us. 253-922-6670 Fax 253-922-2258 |
Bumpers, bumper: and fendering
| Item | Description | Price | Picture |
|---|---|---|---|
| Fendering materials | various fendering materials: 14"X14"X25' square, 6"X10"X10' square, 10"X12"X6' square, A shape 20"X24"x4' D shaped12" X 20' long and many other short pieces. big stuff runs about 40#/foot (of) | $2/lb. | pic |
| Dock fenders | Dock fenders, 4' long . (ofba) | $2/lb. | |
Any questions, please call us. 253-922-6670 Fax 253-922-2258 |
| Item | Description | Price | Picture |
|---|---|---|---|
Various lengths of chain and various sizes and types. Mostly between 1/2" and 1" |
|||
| Chain | 1/2" black chain, Approx. 500-1000 feet, slightly rusty (of) | $3.50 / foot | |
| Approximately 15 bundles (80' approx.) shots of used 3/4" galvanized (of) | $5.00 / foot | ||
| Assorted lengths of used 1/2" long link chain (of) | $3.00 / foot | ||
| 1 shot 14 balt chain (of) | $350 | ||
| 1 shot 2 3/4 Naco (ofdk) | $800 | ||
| Short pieces of 1 1/2" - 2 3/4" at (ofdk) | $.15 a lb | ||
Tow plates, swivels, stoppers and other chain hardware look under marine deck hardware. |
|||
| Chain and anchor paint | Chain and anchor paint by the drum or can, $5 per gallon or less in quantities | $5 per gallon | |
| Cosmoline | Chain and anchor paint by the drum or can, $5 per gallon or less in quantities | $5 per gallon | |
| Greases, heavy and medium. | |||
| LPS 1 | LPS 1 light penetrating oil, by the drum $200, by the 5 gallon or the gallon $5 | $5 per gallon | |
Any questions, please call us. 253-922-6670 Fax 253-922-2258 |
| Item | Description | Price | Picture |
|---|---|---|---|
| Hatches | 1 ea. 23" X 15" oval hatches 4-dog, 5 in. combing 3/8 thick (ofdk) | P.O.R | |
| 2 ea. Steel Hatches 30" X 48" X 16" Combing 8-dog 3/8" stock | $350 | ||
| 1 ea. Steel Hatch 24" X 24" X 8" Combing 4-dog spring loaded 1/2" stock (of) | $400 | ||
| 1 ea. Steel Hatch 22" X 28" X 7" Combing Hand wheel spring loaded 1/2" stock (of) | $400 | ||
| 1 ea. Steel Hatch 30" X 30" X 6" Combing 4-dog 1/2" stock (of) | $450 | ||
| 1 ea. Steel Hatch 28" X 28" X 7" Combing 4-dog 3/8" stock (of) | $350 | ||
| 2 ea. Steel Hatches 14" X 24" X 3" Combing Bolted lid 3/8" stock (of) | $200 | ||
| 2 ea. 26" X 57" Steel 4 dog RH and LH used (ofdk) | $500 each | ||
| 4 ea. 15" X 23" 3/8" steel oval hatches 4 dog, 5" combing (ofdk) | $250 each | ||
| 2 ea. 30" X 48" heavy duty steel hatches, new, 8 dog (of) | $1000 | ||
| 1 ea. 30" square, 4 dog | $400 | ||
P.O.R = Price On Request, please call us. 253-922-6670 Fax 253-922-2258 |
| Brand Name | Description | Price | Picture |
|---|---|---|---|
| G&W Electric | Oil fuse Cutouts, G&W Electric , Model FC - 61, 15 kV, 100 Amp NEW, Qty 3(iw) | $250ea | |
| Square D | 10 HP 115 VDC, Reversing steering controller, Square D NEW (ics) | $400 | |
| Cutler Hammer | 25 HP 230 VDC controller, reversing for cargo winch, shunt field series field, NEW (ics) | $2000 | |
| Cutler Hammer | 40 HP 440V 3-phase 30 Amp, Reversing Controllers ,mine sweep takeoff, Qty 4 (op) | $1500ea | |
| Ward Leonard ele | 40 HP 115 VDC motor controller, 25 kW 440V 40A generator control, MG controller, Qty. 2 (op) | $2,000ea | |
| Westinghouse | 65-130 HP 440V 3-phase. 60 HZ, motor controller, Class 6865 Spec. 17C10, SN 7Y1341 (op) | $2000 | |
| Rotary Phase Converter H.A.S manufacturing 230V single phase input 230V 3 phase output, HP 7.5, used good and clean condition (iwcharliem) | $1000 | ||
| Power Distribution service cabinet weather proof. | |||
| 1-400 Amp 480V 3 pole, 3 wire, Inlet connector | |||
| 1-200 Amp 480V 3 pole, 3 wire Connector outlet | |||
| 3-60 Amp 480V 3 pole, 3 wire, connector outlet | |||
| all with manual disconnects and breakers | |||
| Lighting | Street light poles, 29 feet long, aluminum (ofdk) | $250 | |
| Lighting | Street Light poles, 30-35 feet long, steel (ofdk) | $150 | |
| Lights | Spot Lights for outside yard lighting | $150 | |
| Lights | Marine lights for ship passages brass | $50-150 | |
| Lights | surplus fixtures | 10-30 | |
Any questions, please call us. 253-922-6670 Fax 253-922-2258 |
| Brand Name | Description | Price | Picture |
|---|---|---|---|
| Acme | Acme transformer, 150 KVA, HZ 60, 3 Phase, weight 1203lbs, style G, Cat No. T-2A-3500150-35, 480V W/FC - 480y/277 (opdk) | P.O.R | pic |
| Ajax | Step down transformer, 30 KVA, 3 ph, 230/460V - 275/159, Ajax NEW (ics) | $500 | |
| Alice Charmers | Lighting transformer, 37.5 KVA, 460 - 117, single phase, Alice Charmers, Qty 3 (is) | $600ea | |
| International Transformer Company | Step down transformer, 25 KVA 1 ph., 240/480-120/240, International Transformer Company, Qty. 2 NEW (icsdk) | $400ea | |
| ITE electrical | Lighting transformer, 15 KVA 1 ph. , 480 - 120/240, ITE electrical (ics) | $300 | |
| Tierney | Air cooled transformer, KVA 45, 3 phase, 480V - 208y/120, cycles 60, weight 990lbs, Cat. No. AC345_8T18H65.WP, not yet electrically tested (opdk) | P.O.R | pic |
Any questions, please call us. 253-922-6670 Fax 253-922-2258 |
| Brand Name | Description | Price | Picture |
|---|---|---|---|
prices are for standard motors, specials have different pricing |
|||
| have a few "15 or so" fractional single phase | $20 | ||
| 3 ph. 1/2 to 5 HP | $20 per HP $15-100 | ||
| 3 ph. 7 to 15 HP | $18 per HP $80-350 | ||
| 3 ph. 30 HP and up | $15 per HP | ||
| Steelman Industries | H-A-S Rotary Phase Converter 230volt input, single phase, 230volt output 3 phase, No load amps 9.5, Max HP largest motor 7.5, max HP total system 20, serial # 88074, mod R7 5/20-230HD, Design F, 1988 (cmiw) | $1000 | |
| Wagner | 2 HP 220V 1 ph. 3450 RPM, Frame L56C Wagner (is37, 22B) | $125 | |
| Dayton | 2 HP 115/220V 1 ph. 3450 RPM, Frame 56C Dayton (is38, 22C) | $125 | |
| G.E. | 2 HP 230V 1ph. 1715 RPM G.E. (is03, 22D) | $150 | |
| GE Motors | 7.5 HP Single phase TEFC 230 V 28.5 amp, 1770 RPM, 215T frame, GE Motors, model 5KC215BB211A 167#s (is03, 23D) | $350 | |
3 phase below here, many more fractional and up to 5 HP not listed |
|||
| GE | 2 HP 440V 3400 RPM, frame 224, GE , Sharples purifier motor (is26, 13D) | $600 | |
| Crocker Wheeler | 2 HP 220/440V 3450 RPM, frame ASP 224, Crocker Wheeler (is27, 14D) | $75 | |
| Linestart | 2 HP 220/440V 3450 RPM, frame 224, Linestart (is28, 14D) | $75 | |
| Electric Specialty | 2 1/2 HP, 220/440V, 1800 RPM, Type BLS 4550, Synchronous , Electric Specialty(is36) | $75 | |
| Fairbanks Morse | 3 HP 220/440V, 3450 RPM, Vertical shaft , frame NS224BV, (is34, 21D) | $100 | |
| GE w/ Stearns | 3 HP 220/440V, 1670 RPM, frame 184, GE w/ Stearns electric brake , Model HT 72-9, Qty. 2 (is34A,B 24D) | $200 | |
| Allis Chambers | 3 HP 208 3 ph. 690 RPM frame 324, Allis Chambers (is51A, 60A) | $300 | |
| Allis Chambers | 5 HP 208 3 ph. 860 RPM, frame 324, Allis Chambers (is51B, 60A) | $400 | |
| G.E. | 5 HP 1200 RPM 440V type KT180, old style motor G.E. (is34, 18D) | P.O.R | |
| 5 HP 220/440V 750 RPM Frame (is05, 59D) | $400 | ||
| Wagner | 7.5 HP 220/440V 1750 RPM, frame 254V Wagner (is45, 60B) | $350 | |
| Reliance | 10 HP 440V 1100 RPM, frame C405, Reliance (is24, 34D) | $500 | |
| GE | 10 HP 440V 1750 RPM, frame 324, GE (is50, 60A) | $350 | |
| GE | 15 HP 440V 745 RPM, frame 326, GE (is25, 19D) | $750 | |
| Electro Dynamic | 15 HP 220/440V 1750 RPM, frame 284U, Electro Dynamic (is29, 16D) | $750 | |
| Fairbanks Morse | 15 HP 220/440V 875 RPM, frame RS365, Fairbanks Morse (is32, 17D) | $750 | |
| Electro Dynamics | 15 HP230/460V, 1740 RPM, frame 284U, Electro Dynamics (is42, 60D) | $750 | |
| 15 HP 220/440 1750 RPM sleeve bearing (ics) | $750 | ||
| GE | 20HP 440V, 1750RPM, GE, frame 364 (is06, 34D) | $800 | |
| Wagner | 25HP 440V, 1750RPM Wagner , Frame 405, Qty 2 (is07, 29D) | $850 | |
| US motor | 25 HP 220/440V, 1500 RPM, US motor, vertical shaft pump style motor, frame 404-4 (is21, 36D) | $850 | |
| US Motor uniclosed | 25HP 208,220,240V 1200RPM, frame 364U, US Motor uniclosed (is30, 16D) | $900 | |
| US Motor | 30 HP 220/440V, 1750 RPM, frame 326U, US Motor (is39, 59D) | $900 | |
| US Electric | 30 HP 220/440V, 1750 RPM, frame 256T, US Electric (is40, 59D) | $900 | |
Any questions, please call us. 253-922-6670 Fax 253-922-2258 |
Electric Motors AC (continued)
| Brand Name | Description | Price | Picture |
|---|---|---|---|
| Westinghouse | 30/7.5 HP 1800 / 450 RPM 2 speed, 440V 38/16 Amp 3ph, Westinghouse Vertical | P.O.R | |
| Frame S445, SN 16-1B9260, Navy spec. 17M10A (op08) | $2500 | ||
| Continental Electric | 40 HP 220/440V, 1750RPM, Continental Electric (is31, 17D) | $1000 | |
| Lincoln | 40 HP, 230/460V, 3515 RPM, frame 286TS, Lincoln (is43, 60C) | $1000 | |
| US Motors | 40 HP, 230/460V, 3600 RPM, frame 365, US Motors (is44, 60D) | $1000 | |
| Louis Allis | 50 HP 220/440V 1180 RPM, Louis Allis, Frame 504 (is09, 14D) | $1500 | |
| 50 HP 440V 1175RPM, Drip proof Energy Efficient. Frame 365T | P.O.R | ||
| Reliance | Contactor &box mounted Reliance,Qty 2 (isdk10) | $2000 | |
| Reliance | 50 HP 230/460V 1750 RPM, frame 326T, Reliance, Qty. 2 (is41A,B, 60C) | $1000 | |
| Westinghouse | 60 HP 460V , 1750 RPM, TEFC , frame MACF364TS (is11, 35D) | $1000 | |
| Louis Allis | 75HP 220/440V, 1750 RPM, TEFC, Frame 444US (is12, 59E) | $1500 | |
| Fairbanks Morse | 75HP 220/440V, 498RPM, Frame SF686,(ofdk13) | $2000 | |
| US MOTOR | 75HP 230/460V 1775 RPM, verticle motors , Frame A4444UP, uniclosed, Type RV, Design B | P.O.R | |
| Code F, Model s.f.1.0, SN C1002255, Thermally protected, one without angle drive(opdk14) one w/angle | $3000 | ||
| drive for aux.drive to pump Angle drive: Johnson Gear & Mfg. Co. mod SD 90, SN 43631, ratio 1:1, 70BHP@1160, 2" shaft in and out. (opdk15) | $4000 | pic | |
| GE | 130 HP 440V, 1100/1800 RPM, GE NEW in crate Qty. 2 (op16,17) | $5000 | pic |
| Reliance | 150HP 440V, 3555 RPM, drip proof, Frame CA505S ,design B , cont. duty, (opdk18) | $8000 | pic |
| Fairbanks Morse | 150HP 440V, 705 RPM, frame RS684, Fairbanks Morse, tripple drum winch drive(op23) | $6000 | |
| GE | 200HP 440V, 705 RPM, 3-phase GE (ydk) | $6000 | pic |
| Reliance | 200HP 575V 194A , 1190 RPM, Frame 507U,type BAO,Ball bearing, Reliance(opdk19) | $6000 | |
| GE | 250HP, 440V, 3 phase, 60 cycle, 705RPM, FL Amps 369, GE Slip Ring Motor, Type MA Fame6336 | ||
| Time rating 1 hr., Semci Factor 1.0 Code, Sec volts 281, sec Amp 400, AISE Frame size AC 50 | |||
| Model 5MA6336FAF1, Ser# AC8359636, double ended w/ brake drum (kydk) | $6000 | ||
| Westinghouse | 400HP 460V, 600 RPM, 467 amp., Model CW SN:1976816A, S.F.1.15, Sec Volt 725, sleavebearing Westinghouse (kydk) | $6000 | |
| Westinghouse | 400HP 2200V, 1188 RPM, Frame 32C, drip proof, Sleeve bearing, (ofdk20) | $8000 | |
P.O.R = Price On Request, please call us. 253-922-6670 Fax 253-922-2258 |
Electric motor "vari drive" variable speed
| Brand Name | Description | Price | Picture |
|---|---|---|---|
| US Electric Motors | 1.5 HP 220/440V, 11-56 RPM Horizontal config. US Electric Motors(is01, 28D) | $300 | pic1 pic2 |
| Reliance | 1 1/2 - 3 HP, 220 V, 2 speed motor 1725/855, 140-280 RPM or 70-140, size 3W22-V1G-18\9, vertical w/Right angle shaft output, (is3, 24D) |
$300 | pic |
| US Motors | 2 HP 220/440V, 390-770 RPM, frame 22-252-20 Horizontal config.(is02, 28D) | $500 | pic1 pic2 |
| US Motor varidrive | 3 HP 220/440V 41- 125 RPM, frame 23-213-30, horizontal config. , US Motor varidrive(is5, 22D) | $600 | pic |
| Louis Allis | 10 HP 230/460V 93-280 RPM, frame 30-215T-313A, vertical config., Louis Allis (is4, 23D) | $800 | pic |
| 30 HP GE 600 rpm, | P.O.R | pic1 pic2 pic3 | |
P.O.R = Price On Request, please call us. 253-922-6670 Fax 253-922-2258 |
| Brand Name | Description | Price | Picture |
|---|---|---|---|
| DC | Up to 5 HP | $100/HP | |
| DC | Over 5 | $75/HP | |
| DC | Over 10 HP | $60/HP | |
| GE | 1/6 HP 230VDC 1140 GE , frame 56,(isdk70, 20C) | $50 | |
| GE | 1/2 HP 115VDC 1750 GE frame 56, Qty 9 (isdk51, 20C) | $100 ea | |
| Baldor | 3/4 HP 115VDC 1750 Baldor some new some used Qty. 7, 4 lead shunt 6 lead compound (isdk52) | $200 ea | |
| GE | 1 HP 230VDC 1750RPM, frame 203, GE, (is73, 21D) | $300 | |
| Louis Allis | 1 HP 230VDC 1750RPM, frame 225, Louis Allis,(is78, 13D) | $300 | |
| Electric Machinery | 1 HP 230VDC 1150RPM, Electric Machinery ,(is76, 22D) | $350 | |
| Century | 1 1/4HP 230VDC 3450RPM, Century (is77, 22D) | $200 | |
| Baldor | 1 1/2 HP 120VDC 1750 RPM Baldor (isdk53) Qty 2 | $250 ea | |
| GE | 1 1/2 HP 115VDC 1750 RPM GE , frame ?? Delaval purifier (isdk69, 16D) | $2000 | |
| 1 1/2 HP 115VDC 3450 RPM, Stab shunt,(is66, 22D) | $250 | ||
| Electro Dynamic | 2 HP 230VDC 1200RPM, frame D-225, Electro Dynamic, (is62 28D,63,64 21D) Qty 3 | $250 ea. | |
| 2 HP 115VDC 350 RPM ,steering motor ,double end drive, brake on one end, NEW and used Qty 4 (is67A, 15D, C, D 18D, E 35D) | $3000 ea. | ||
| GE | 2 HP 230VDC 1750RPM, shunt GE ,(is75) | $800 | |
| GE | 5 HP 230VDC 1750RPM, frame 254, stab shunt, GE, (is74, 22D) | $800 | |
| 7.5 HP 120VDC 1750RPM,type SK, frame 43, stab wound, SN:90-3B4309 | P.O.R | ||
| Westinghouse | 7.5 HP 120VDC, 57AMP, 1750 RPM Westinghouse frame 43, Type SK Marine stab sh Ser # 90-3B4309 Westinghouse(is) | $100 | |
| 10 HP, 240 VDC, 1200 RPM, 38 amps, Type 3 BH DC, Frame BHDP, Arm 110, SN:73920, | P.O.R | ||
| C. Wheeler | 10 HP 240 VDC, 38 AMP, 1200RPM, C Wheeler Frame BHDP, Type 8BH Ser #73920 ARM 110 Volt (kydk) | $1000 | |
| Allis Charmers | 15 HP 115VDC 650 RPM, Type EB90, Allis Charmers Qty. 2 (is61, 36D) | $900 ea | |
| 25 HP, 240VDC, 89AMP, 1800 RPM, GE Frame 83 Type CD, Ser #80712 ARM 220Volt | P.O.R | ||
| GE | 25 HP 115VDC, 1150 RPM, Frame 93, GE (is54, 20D) | $1500 | |
| 25 HP 115VDC, 1550 RPM, (is55, 23D) | $1500 | ||
| 25 HP 115VDC, 1200 RPM, (is56) | $1500 | ||
| 25 HP 230VDC, 1200 RPM, Stab. Shunt, W/shaft break and Controller (cargo winch) (is57) | P.O.R | ||
| Century Electric | 25 HP 115VDC, 1400/1750RPM, Century Electric, (is72, 22D) | $1500 | |
| Century Electric | 25HP 240VDC, 97amp, 1750RPM, Century Electric Qty. 2, Fram 37 type DN serial #73918, driving gear box (ofdk) | $1500ea 2000 w/ gear box ea. |
|
| GE | 25 HP 240VDC, 1800 RPM, Frame 83, Arm 220, SN:80712, Type CD DC, GE, rebuilt by Franklin (kydk) | $1800 | |
| Century Electric | 30HP 900/1200 RPM, shunt wound, Century Electric (is58, 16D) | $2000 | |
| 30 HP 230V, 1750 RPM, (is65, 34D) | $2000 | ||
| Allis Charmers | 35HP 1800 RPM, 140 amps, Volts 240 Armater 245 Field, SN:731021, Frame 444-2, Allis Charmers, Type OGNA DC, rebuilt by Franklin (kydk) | $2000 | |
| 35HP, 240 VDC, 140Amp, 1800RPM, Allis Frame 4442, Type Ogna, Ser# 731021 ARM225 | P.O.R | ||
| Electro Dynamic Co | 60 HP 230VDC, 450-900 RPM, compound, Frame 25S, SN 216189, Electro Dynamic Co. NJ (is59) | $3000 | |
| Westinghouse | 62.5 HP 115 VDC, 1750 RPM, Frame 123L, Shunt wound, Westinghouse (is60, 13D) | $3000 | |
| GE | 100 HP GE 240 VDC, 600/1200 RPM, 220/75 field volts, 341 amps, Type CD, Frame 1441, SN 78426,(dky) | $3500 | pic |
| 250 HP 240VDC 1900 RPM, size JHLL, Compound wound, Drip proof, Ball bearing, Type CCM,Crocker Wheeler mfg. Qty. 4 (of61) used as is price | $5000 ea | ||
| Franklin Rebuilt | 125VDC, KW 3, Amp 24, 1750RPM, Duty DPSE Cont 40 deg. celisus, 1943 SEP Exc (kydk) | $3500 | |
Any questions, please call us. 253-922-6670 Fax 253-922-2258 |
Electric gear head motor pic
| Brand Name | Description | Price | Picture |
|---|---|---|---|
| Small, Right Angle, 172 RPM, 11" lbs. torque (is1) | $35 | ||
| GE | 1/4 HP 115/230V, 58RPM, Right Angle GE, 7GF712EN3KP81 (is 2, 30C) | $150 ea | |
| Master | 1/4 HP 220V, 48RPM, Right Angle worm drive, frame 5820RW, , 3/4" shaft (is 6, 30C) | $150 | |
| Master | 1/3 HP 440V 11 RPM, Right Angle, frame 5825RC (is3, 30C) | $150 | |
| Master | 1/2 HP 220V 420 RPM, Inline offset, 1" shaft (is5, 30C) | $150 | |
| Ajax motor, Baldor gear | 1/2 HP 115/230V, 1 1/3RPM 1200:1, Inline offset, frame 56--5, , .875" shaft (is 8, 30C) | $150 | |
| Master | 1/2 HP 220/440V, 300/1750RPM 2 shaft, Inline offset, frame 7418SP, 3/4"motor 1" gear shaft Qty 2 (is13, 29C | $150 | |
| Master | 1/2 HP 220/440V, 79 RPM, Right angle worm drive, frame 7412 WRW, (is20A, B, 21D) | $150 | |
| Baldor | 3/4 HP 208/440V, ??RPM, Right Angle worm drive double side shaft, frame 56C 513M, 1" shaft (is 9, 30C) | $150 | |
| Century/Perfection | 3/4 HP 208/440V, 146RPM, RA worm drive , frame J56-C, , Model VAC9189S 1" shaft (is10, 30C) | $150 | |
| Dayton | 3/4 HP 220/440V, 69 RPM Right angle worm, frame F56-C, 1" shaft (is14, 29C) | $150 | |
| US Motor | 1 HP 440V, 520 RPM, Inline offset, frame 595-10, 937" shaft (is4, 30C) | $200 | |
| Reliance/Perfection | 1 1/2 HP 230/460V, 146RPM, RA worm drive , frame P56-C, , Model VC9187S 1" shaft (is11, 30C) | $250 | |
| Dayton | 1 HP 230/460V, 45 RPM, Right Angle worm drive , frame 143T-6, 1" shaft (is15, 29C) | $200 | |
| Reliance | 1 HP 180VDC, 87 RPM, Right Angle worm drive , frame FE56-C, (isdk16, 30D) | $200 | |
| Electra Motors | 1 1/2 HP 220/440V, 144RPM, Right Angle worm drive , frame CM56W-216RL, (is12) | $250 | |
| Syncrogear/Dings dynamics | 2 HP 230/460V, 56 RPM, Inline centered w/brake , frame 145T-21, (is17, 30D) | $250 | |
| Stirling system | 5 HP 440V, 59 RPM, Inline offset, frame 284, (is19, 30D) | $500 | |
| GE | 15 HP 110Volt field, 1200 RPM, frame 83, Type CD DC 240volt 55amp, SN:73919Gearbox: Foote Jones Jeffery Gallion Inc., Model:723XSL SN:IX 97747, input 1150, 7.59 (is) | $350 | |
Any questions, please call us. 253-922-6670 Fax 253-922-2258 |
|||
Top
Electric Generators: generator only, no drive
| Brand Name | Description | Price | Picture |
|---|---|---|---|
| Hobart | 3KW 125V, 1200 RPM 3ph. 2 bearing New (is76, 29D) | $300 | |
| 3KW 125V DC, 24Amp, 1750 RPM, Type AM Frame 610, Model AM 610 A10, Duty DPSE Cont 40degree C (dky) | P.O.R | ||
| 5KW 240V, 1200 RPM, DC 2 bearing Used (is77, 29D) | $400 | ||
| 6.3 KVA, 115VAC 1 ph., 1800 RPM, 2 bearing (is95, 23D) | $500 | ||
| 7.5KW 440V 3ph., 1800 RPM, 2 bearing Qty. 3, like new (is78A,B 19D,C) | $800ea. | ||
| Delco | 10KW DC 1200 RPM, 1 bearing,, like new (is80, 28D) | $800 | |
| Westinghouse | 25KW 125VDC, 1200 RPM, 2 bearing DC , (is82) | $1100 | |
| Delco | 30KW 120VDC 260Amp, 1500RPM, star shunt wound, Model NO1-3662, single bearing, (of83) | $1300 | |
| Cat | 55KW 69KVA 1800RPM no bell | $1500 | |
| Delco | 60KW 120VDC 500 AMP, 1500 RPM, star shunt wound, Model No1-3659, single bearing, (of85) | $1500 | |
| EM | 100 KW 450V, 1200 RPM, Brushless exc., Frame 720, 1 bearing (iwdk86) | $3500 | |
| General Electric | 100 KW 450V, 1800 RPM, Frame 444Y, , 2 bearing (is96) | $2000 | |
| Marathon | 104KW 3phase, 120/208V 1800RPM Model 3285A-1262A S/N AD127757CLL100meg ohms, 21"bell (opdk) | $2000 | |
| 125KW, 156KVA, EM BemerII 450V, 200Amp, 3phase, 60cycle, 1800RPM, 12wire, ser # 271172631, adapter ring 26 3/4" bolt centers bell end #0, 23" Gen end. (iwdkwsf) | $2,000 | ||
| Baylor | 150KW 220/440V, 1800RPM, 60Hz , 3 phase 21" bell. Model M420EAL-006 200 megs. S/N KI-18951 (opdk) | $2000 | |
| Marathon | 185KW 220/440V 610/305A 233KVA 3ph 60Hz 1800RPM , Model 431RSL201A S/N VF3601721 24½" bell (opdk) | $2000 | |
| Westinghouse | 250 KW 450V, 1200 RPM, Exc. A 34.4 120V 1944,Single bearing, (of87) | $2000 | |
| EM | 500KW 277/480V, 1200 RPM, 3ph, 1 bearing, Brushless, Frame 727, (iwdk92) | $4500 | |
| Cat | 700KW 2400V, 1200 RPM, slip ring exc. (iwdk94) | $6000 | |
Any questions, please call us. 253-922-6670 Fax 253-922-2258 |
| Brand Name | Description | Price | Picture |
|---|---|---|---|
| DIEHL Mfg. Co | 150W 30 VDC, 5 amp, 1725 RPM, compound wound, Type ZD, frame 145, s.s.no. ZD145-2, Motor info. 1/3 HP 115V 1ph. 6amp. , Frame 145 type ZT, SS ZT145-2, . Qty. 3 (is1, 59B) |
$75 | |
| Electric Specialty Co. | 185W 120VAC 1.56amps, Type MG353P, comp. winding, cont. duty, 3600RPM S/N 1K7444, Motor info. .35 HP 115VDC,4 amps, Type MT# (is2, 59B) |
$100 | |
| Electric Specialty Co. | 45W 110V .68amp, 400 cyc. .6PF, 3 PH, duty cont. 75deg rise, Motor info. 1/6 HP 117V 3ph. 60Hz 1.5amp. 3430 RPM, Type AS41G/AA2, No. 67J9457, (is3, 59B) |
$50 | |
| Electrolux Corp. | 500W 13 / 26 VDC Type CAJO211444, motor 105-130VDC 6 amps. (is4, 59B) | $200 | |
| Submarine Signal Co. | 165W 115V 3ph. 0.4amp 0.8pf. Motor info 1/2 HP 115V 6 amp. 1ph 60Hz, 3500 RPM 24V excitation (is5, 59B) | $100 | |
| Continental | 750 - 360 watt, AC drive 3 phase, 2 speed unit, 220V, DC out 250-120volt 3 amp.(is10, 59B) | P.O.R | |
| Navy | 1KW, 230 VDC in, 115/125 AC 60 cyc out, Navy unit about 4' long, 16" wide and high, (is13, 15D) | P.O.R | |
| Fairbanks Morse &Co. | 1.5KW 87V 1750 RPM, shunt wound generator only, (is6, 59B) | $50 | |
| Onan | 1500W 32VDC 4 amps, frame 210C85, Model 105U3A-232/A, Generator only (is7, 59B) | $400 | |
| EP | 3KW DC 125-140V, 21 amp output, AC 5hp 240/480v 3 ph. input, EP like new (is12, 59B) | P.O.R | |
| Peerless Electric Co. | 4-2KW 200-100VDC 2 ampo 1750-850RPM, frame D202D, 3/4-3/8 HP 220V 3ph. 3-1.5 amp. frame PW66D (is8, 59B) | $25 | |
| 7.5KVA 440V 9.8A 3ph.output, 10HP 105-130VDC input, Qty 4 new (is) | $2,500 | ||
| Lincon | Lincon welder MG (is11, 59B) | P.O.R | |
| Century | 2 ea. Generator End: 25 HP, 240Volt Arm, 200 Field , TypeDN, DC, SN:73615, Frame 374 Motor End: 30 HP 230/460V, 72/36 amp., 1760 RPM, 3 phase, Frame 286T, S.F. 1.15 Cont Model# 5K286AN205A (is) | $600 | |
P.O.R = Price On Request, please call us. 253-922-6670 Fax 253-922-2258 |
